When in 2 CH (48 kHz) mode:
Input | Audio channels on which input |
connectors | signals are recorded |
|
|
AUDIO IN 1/3 | Audio channel 1 |
|
|
AUDIO IN 2/4 | Audio channel 2 |
|
|
When in 4 CH (32 kHz) mode:
Input | Audio channels on which input |
connectors | signals are recorded |
|
|
AUDIO IN 1/3 | Audio channels 1 and 3 |
|
|
AUDIO IN 2/4 | Audio channels 2 and 4 |
|
|
You can switch the audio recording mode with the REC MODE menu item (see page 71). The selection is indicated by the REC MODE display on the front panel.
| VIDEO OUT | 1/3 | 2/4 | AUDIO OUT | |
Y/CPST | SUPER |
| MONITOR | ||
|
|
|
|
| |
3 MONITOR connector
1 VIDEO OUT connectors | 2 AUDIO OUT 1/3 and |
| AUDIO OUT 2/4 |
| connectors |
aVIDEO OUT connectors (BNC type)
There are the following VIDEO OUT connectors for outputting analog video signals:
•Y/CPST
•R−Y/S−C
•B−Y/S−Y
•SUPER
The signals output from these connectors depend on the setting of the VIDEO OUTPUT menu item (see page 72). The setting is indicated by the VIDEO indicators in the OUTPUT signal display section on the front panel.
The analog video signals that can be output from these connectors are as follows.
When COMPOSITE/S VIDEO is selected:
Connectors | Output signals |
|
|
Y/CPST | Composite signal |
|
|
R−Y/S−C | S−C |
|
|
B−Y/S−Y | S−Y |
|
|
SUPER* | Composite signal |
|
|
*When the CHARA. DISPLAY menu item (see page 66) is set to ON (factory default setting), the SUPER connector outputs a composite video signal with superimposed text information.
When
Connectors | Output signals |
|
|
Y/CPST | Y signal |
|
|
R−Y/S−C | R−Y signal |
|
|
B−Y/S−Y | B−Y signal |
|
|
SUPER* | Composite signal |
|
|
*When the CHARA. DISPLAY menu item (see page 66) is set to ON (factory default setting), the SUPER connector outputs a composite video signal with superimposed text information.
bAUDIO OUT 1/3 and AUDIO OUT 2/4 connectors
These connectors output analog audio signals. The output audio channels are determined by the playback audio mode and the setting (1/2 CH or 3/4 CH) of the AUDIO OUTPUT menu item (see page 72) as follows.
When in 2 CH (48 kHz or 44.1 kHz) mode:
Output | Output audio channels |
connectors |
|
|
|
AUDIO OUT 1/3 | Audio channel 1 (when 1/2 CH is |
| selected) or silent (when 3/4 CH is |
| selected) |
|
|
AUDIO OUT 2/4 | Audio channel 2 (when 1/2 CH is |
| selected) or silent (when 3/4 CH is |
| selected) |
|
|
When in 4 CH (32 kHz) mode:
Output | Output audio channels |
connectors |
|
|
|
AUDIO OUT 1/3 | Audio channel 1 (when 1/2 CH is |
| selected) or audio channel 3 (when 3/ |
| 4 CH is selected) |
|
|
AUDIO OUT 2/4 | Audio channel 2 (when 1/2 CH is |
| selected) or audio channel 4 (when 3/ |
| 4 CH is selected) |
|
|
The current playback audio mode is indicated by the PB Fs display on the front panel.
Location and Function of Parts | 25 |
|
|