Operation

Do this:

 

 

Inhibit the SUPER

Set the CHARA. DISPLAY

connector from outputting

menu item (see page 66) to

text information (time data,

OFF.

operation mode

 

indications, etc.) to the

 

video monitor.

 

 

 

To Set Cue Points

Setting cue points at highlight scenes makes it easy to cue those scenes up later. Cue points can be set in recording, playback or simultaneous recording and playback.

To set a cue point while recording, hold down the J(CUE) button and press the SET button at the desired scene. The message “CUE SET” appears on the monitor screen when a cue point is set (“Cue Set” in the time counter).

When using a supplied RM-LG2, you can set a cue point by pressing the CUE button on the RM-LG2.

To cue up a cue point

Hold down the J(CUE) button and press the NEXT/PREV button to cue up a cue point.

For more information on this operation, see “Cueing Up a Desired Cue Point” on page 44.

To delete a cue point

Cue up the cue point that you want to delete, hold down the J(CUE) button, and press the RESET button. To delete all cue points, select DELETE ALL CUE from the Disk menu and press the k(OUT) button. When the message “DELETE ALL CUE?” appears, press the SET button.

DISK MENU

DELETE

PROTECT

DELETE ALL CUE

For more information about the Disk menu, see “Deleting Clips” on page 45

Long-time Recording With Video Camera

The figure below shows connections between this unit and a video camera.

Reference video

 

 

 

 

 

 

 

 

 

 

 

 

Video camera

signals

 

 

 

 

 

 

Composite video output

 

 

 

 

 

 

a)

a)

 

Y/CPST

REF. VIDEO IN

a) SUPER

This unit

Video monitor

a) 75 Ω coaxial cable

36 Recording