f 400 (i.LINK) connector (6-pinIEEE-1394)Connect a DV cable to make connections to DV devices, computers, and so on.

Notes

•If the unit is connected to a device equipped with a 6-pin DV jack, when you intend to disconnect or reconnect the DV cable, turn off the device and pull out the plug of its power cord from the AC outlet beforehand. If you connect or disconnect the DV cable while the device is connected to the AC outlet, high-voltage current (8 to 40 V) is output from the DV jack of the device to this unit, which may cause a malfunction.

•When connecting a device that has a 6-pin DV jack to this unit, first connect the plug of the cable to the 6-pin DV jack of the device.

1Analog video/audio signal input section

•When searching at speeds in the range +1/2 to +1/30 or −1/30 to −1/2 times normal speed, the audio signal output from this connector and monitored on external equipment may sound differently from the audio signal played back on this unit.

g (network) connector (RJ-45 type)

This is a 10BASE-T/100BASE-TX connector for network (Ethernet) connection.

Caution

When using a LAN cable: For safety, do not connect to a connector for peripheral device wiring that might have excessive voltage.

Y/CPST

VIDEO IN

1/3

2/4

AUDIO IN

R-Y/C

B-Y

 

 

1 VIDEO IN connectors

2 AUDIO IN 1/3 and AUDIO IN

 

2/4 connectors

aVIDEO IN connectors (BNC type)

There are the following VIDEO IN connectors for inputting analog video signals:

•Y/CPST (loop-through connectors)

•R−Y/C

•B−Y

The signals you can connect to these connectors depend on the selection made with the VIDEO button in the video/ audio input selection section. The selection is indicated by the VIDEO indicators in the INPUT signal display section. The analog video signals that can be input to these connectors are as follows.

When COMPOSITE is selected:

Connectors

Input signals

 

 

Y/CPST

Composite signal

 

 

R−Y/C

— (not usable)

 

 

B−Y

— (not usable)

 

 

The two Y/CPST connectors are loop-through connectors. When using the signal input to the left Y/ CPST connector as a reference video signal, for example, you can bridge-connect the signal to other equipment via the right Y/CPST connector (marked

). When no connection is made to the right Y/

CPST connector, the left Y/CPST connector is terminated with an impedance of 75 Ω automatically.

When S VIDEO is selected:

Connectors

Input signals

 

 

Y/CPST

Y signal

 

 

R−Y/C

C signal

 

(3.58 MHz for DSR-DR1000/

 

4.43 MHz for DSR-DR1000P)

 

 

B−Y

— (not usable)

 

 

When Y–R,B is selected:

Connectors

Input signals

 

 

Y/CPST

Y signal

 

 

R−Y/C

R−Y signal

 

 

B−Y

B−Y signal

 

 

bAUDIO IN 1/3 and AUDIO IN 2/4 connectors (XLR-3 pin, female)

Use these connectors to input analog audio signals from an external video cassette player or other audio equipment. The signals input to these connectors are recorded on the audio channels determined by the current audio recording mode, as follows.

24 Location and Function of Parts