Sync phase
Subcarrier phase | Reference line |
Align the sync and subcarrier phases of the black burst signal to the reference line.
5
6
Output the player 1 signal from the
Press the A channel button on the vectorscope.
This displays the sync and subcarrier phases (composite signals only) of the signal from player 1.
7 On player 1, adjust the front panel SYNC PHASE and SC PHASE controls, using a Phillips screwdriver, so that the output from player 1 on channel A is in correct phase alignment with the black burst signal on channel B.
This indicator |
|
|
| This indicator |
moves as you |
| |||
| moves as you | |||
turn the SYNC |
| |||
| turn the SC | |||
PHASE control. |
| |||
| PHASE control. | |||
|
|
|
| |
Adjust the sync and subcarrier phases of the output signal from player 1.
Note
When component signals are used the subcarrier phase indicator does not appear.
8 Output the player 2 signal from the
Adjusting the Sync and Subcarrier Phases | 93 |
|
|