SETUP MENU |
| >> 75% | |
DISPLAY CONTROL |
|
| |
BRIGHTNESS | :75% |
| Time counter display |
100% |
|
|
|
|
|
|
|
* 75% |
|
|
|
50% |
|
|
|
|
|
|
|
Monitor screen
7 Press the j or J (CUE) button to change the setting of the item.
SETUP MENU |
| >> 50% | |
DISPLAY CONTROL |
|
| |
BRIGHTNESS | :75% |
| Time counter display |
100% |
|
|
|
* 75% |
|
|
|
|
|
|
|
50% |
|
|
|
|
|
|
|
Monitor screen
8 To change other settings, press the K (IN) button to return to the previous screen, then repeat steps 5 to 7 as required.
9 When you have completed the settings, press the SET button.
The message “NOW SAVING...” appears on the monitor screen, and “Saving...” appears in the time counter display, while the new settings are saved in memory.
When the saving operation is completed, the monitor screen and time counter display return to their normal indications.
Notes
•If you power off the unit before saving operation is completed, settings may be lost. Wait until the saving is completed before powering off the unit.
•If, instead of pressing the SET button, you press the MENU button, the new settings are not saved. The message “ABORT !” appears on the monitor screen and “Abort !” in the time counter display for about 0.5 second, and the system exits the menus. To change more than one setting, be sure to press the SET button after making the settings.
Meanings of indications on the monitor screen
Meaning | |
|
|
Pressing the k (OUT) | |
the right of a menu item | button switches to the next |
See step 1 of the foregoing | lower menu level or to a |
operating procedure. | setting selection screen. |
|
|
Pressing the K (IN) button | |
the left of a menu item | returns to the previous |
See step 4 of the foregoing | (higher) menu level. |
operating procedure. |
|
|
|
Character string at the right of | Current setting of the menu |
a menu item | item |
| When shown with a colon |
| (:): |
| the current setting is the |
| same as the factory |
| default setting. |
| See step 4 of the |
| foregoing operating |
| procedure. |
| When shown with a raised |
| dot (•): |
| the current setting is |
| different from the factory |
| default setting. |
| See step 2 of the |
| operating procedure in |
| |
| |
|
|
An asterisk in a complete list | Factory default setting |
of settings |
|
See step 6 of the foregoing |
|
operating procedure. |
|
|
|
|
|
Displaying Enhanced Items
The factory default setting is not to display enhanced items.
To display enhanced items, set the MENU GRADE menu item (see page 73) to ENHANCED, following the procedure in the previous section “Changing the Settings of Basic Items.” (In step 3, first select “MENU GRADE,” and next select “ENHANCED,” then press the SET button to save the setting in memory.)
With this done, when you press the MENU button and the
k(OUT) button to display the setup menu, all basic and enhanced items on menu level 1 appear.
Changing the Settings of Enhanced Items
To change the settings of enhanced items, first carry out the procedure in the previous section “Displaying Enhanced Items,” then proceed as follows.
Changing Menu Settings 77