To display the protect operation menu, select PROTECT in the Disk menu and press the k (OUT) button. In the protect operation menu, select PROTECT ALL ON or CLIP and press the SET button. All clips or individual clips are protected.
When PROTECT ALL ON is selected
A message (ALL PROTECT?) appears asking you to confirm the protection. Press the SET button again to protect all clips, or press the MENU button to return to the menu without protecting.
When CLIP is selected
Display the clip to protect using the PREV and NEXT buttons, and press the SET button. The OFF display shown on the screen before the clip's timecode changes to ON, to indicate that the clip is protected. At this point, you can unprotect the clip by pressing the RESET button.
When you have protected all of the clips that you want to protect, press the MENU button to return to the protect operation menu and press the SET button.
To Search in Clip Units (Clip Jump)
Press the PREV button or the NEXT button on the front panel.
PREV button: The first press moves to the start point of the clip containing the current position. The second press moves to the start point of the previous clip.
NEXT button: The first press moves to the start point of the next clip. The second press moves to the end point of the next clip.
Example
Playback direction
Clip 1 | Clip 2 |
| Clip 3 | Clip 4a) |
| ||
|
|
|
|
|
|
|
|
PREVNEXT
a) The last clip
When you press the PREV button or the NEXT button at the current position (point P), the unit behaves as follows. PREV pressed one time: Jump to point E.
PREV pressed two times: Jump to point C.
NEXT pressed one time: Jump to point G.
NEXT pressed two times: Jump to point I.
46 To Search in Clip Units (Clip Jump)