Sending Data

You can send each clip, clips registered in cliplists, and address book data to other recorders.

Sending Clip Data

Use the following procedure to send clip data.

1 Select the SEND CLIP item in the Network menu and press the k (OUT) button.

NETWORK MENU

 

>Clip

SEND

 

 

CLIP

 

 

Time counter display

CLIPLIST

A/V/TC/CM

 

 

 

ADDRESS BOOK

 

 

 

 

 

 

Monitor screen

The SEND CLIP screen appears, showing the currently selected destination host name, the transfer target clip, and its duration.

 

SEND CLIP

 

 

< 01: AAAAAAAA

>

Transfer destination host a)

HOST: HOST2

 

 

 

 

CLIP:

00001

 

 

 

Number of clip to send b)

 

 

 

DUR :

0:02:12:20

 

Duration of clip to send c)

 

SEND : SET KEY

TO MENU : MENU KEY

a)“--------” is displayed when no destination host is selected.

b)“----” is displayed when no clip is selected.

c)“0: 00: 00: 00” is displayed when no clip is selected.

2 If the destination host and clip are correct, proceed to step 8.

To change the destination host, select HOST and press the k (OUT) button.

A list of host registered in the address book appears.

If the destination that you want is not in the list Register the destination in the address book (see page 53).

3 Select the destination from the list and press the k (OUT) button.

You are returned to the SEND CLIP screen, which displays the data for the selected destination.

4 Check that the destination is correct, and press the K (IN) button twice to return to the SEND CLIP screen.

5 Select CLIP and press the k (OUT) button.

The normal screen appears on the monitor.

 

SEND ADDRESS BOOK

 

Clip 00001

< 01: AAAAAAAA

>

 

HOST: BBBBBBBB

>

 

Time counter display

CLIP: 0001

 

 

 

 

DUR : 0:02:12:20

 

 

 

 

 

 

 

 

 

CLIP SEL

00001

 

 

 

 

TCR 00:01:01:12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Monitor screen

 

 

6 Use the playback, search, and clip jump functions to find the clip that you want to send.

7 Press the SET button when the number of the clip that you want to send appears in the CLIP SEL section at the bottom of the monitor or in the time counter display.

You are returned to the SEND CLIP screen, which displays the number and duration of the selected clip.

Note

Clips cannot be selected while they are being recorded. If you select a clip that is being recorded, a warning message appears asking you to select another clip.

8 Press the SET button.

Preparations for communications start.

When the preparations finish, the message “Issuing transfer request. Will begin transfer after the end of transfer standby.” appears.

Up to 29 transfer requests can be placed on standby. When the 30th request is issued, the message “Request queue full. Cannot send clip.” appears and the transfer is rejected.

To cancel the transfer

In step 8, press the MENU button instead of the SET button.

Sending Data 55