Sony MZ-N510 operating instructions Others, Symptom, Cause/Remedy

Others

Symptom	Cause/Remedy
The recorder does	• The rechargeable battery is not charged.
not work or works	, Charge the rechargeable battery.
poorly.	• The volume is low.
	, Turn up the volume.
	• No disc is inserted.
	, Insert a recorded disc.
	• The HOLD function is turned on (“HOLD” appears in the display
	when you press an operation button on the recorder).
	, On the recorder, disable HOLD by sliding the HOLD switch to
	the opposite direction of the arrow.
	• The lid is not firmly closed.
	, Close the lid until it clicks. Then slide OPEN to open the lid.
	• Moisture has condensed inside the recorder.
	, Take the MD out and leave the recorder in a warm place for
	several hours until the moisture evaporates.
	• The rechargeable battery or dry battery is weak (“LoBATT”
	flashes or nothing appears).
	, Charge the rechargeable battery or replace the dry battery with
	the new one, or connect the supplied AC power adaptor to the
	recorder.
	• The dry battery have been inserted incorrectly.
	, Insert the battery correctly.
	• The disc is damaged or does not contain proper recording or
	editing data.
	, Reinsert the disc. Rerecord the disc. If the error message still
	appears, replace it with another disc.
	• While operating, the recorder received a mechanical shock, too
	much static, abnormal power voltage caused by lightning, etc.
	, Restart the operation as follows.
	1 Disconnect all the power sources.
	2 Leave the recorder for about 30 seconds.
	3 Connect the power source.

62