Sony MZ-N510 operating instructions While playing, Symptom, Cause/Remedy

Models: MZ-N510

1 104
Download 104 pages 22.13 Kb
Page 59
Image 59

Symptom

Cause/Remedy

 

 

“TrFULL” appears

• This is due to the MiniDisc system limitation. When 254 tracks

even before the disc

have been recorded on the disc, “TrFULL” appears regardless of

has reached the

the total recorded time. More than 254 tracks cannot be recorded

maximum recording

on the disc.

time (60, 74, or 80

, To continue recording, erase unnecessary tracks.

minutes) and the

 

recording cannot be

 

done.

 

 

 

The remaining

• This is due to the MiniDisc system limitation. Tracks of under

recording time does

12 seconds (in SP stereo), 24 seconds (in LP2 stereo mode or

not increase even

monaural), or 48 seconds (in LP4 stereo mode) in length are not

after erasing

counted and so erasing them may not lead to an increase in the

numerous short

recording time.

tracks.

 

 

 

 

 

While playing

Symptom

Cause/Remedy

 

 

An MD is not

• Repeat play is selected.

played normally.

, Use MENU on the recorder to change back to the normal play.

 

• Playback mode is changed.

 

, Use MENU on the recorder to change back to the normal play.

 

 

An MD is not

• Disc playing stopped before it came to the last track.

played from the

, Press N (or NX on the remote control) for 2 seconds or

first track.

more to start playing

 

 

Playback sound

• The recorder is placed where it receives continuous vibration.

skips.

, Put the recorder on a stable place.

 

• A very short track may cause sound to skip.

 

, Try not to create a track under one second long.

 

 

Sound has a lot of

• Strong magnetism from a television or such device is interfering

static.

with operation.

 

, Move the recorder away from the source of strong magnetism.

 

 

The volume of the

• The track was recorded in analog (When recorded in digital, the

recorded track is

recording level will be automatically adjusted as same as the sound

low.

source), or you used a connecting cord with an attenuator.

 

, Use a correct connecting cord.

 

• The recording level was low.

 

, Adjust the recording level manually when recording.

 

 

Volume cannot be

• AVLS is on.

turned up.

, Release AVLS settings (page 50).

 

 

59

Page 59
Image 59
Sony MZ-N510 operating instructions While playing, Symptom, Cause/Remedy