Sony MZ-N510 Turning off the beep sound, Recording without overwriting existing material

Turning off the beep sound

You can turn on/off the beep sound on the recorder and the remote control.

1 Enter the menu and select “OPTION” - “BEEP”.

2 Select “OFF”.

To turn on the beep sound

Select “ON”.

Recording without overwriting existing material

If you wish to avoid recording over the current contents of an MD, do the following procedure. All new material will then be recorded from the end of the current contents. The recorder is factory set to record over existing material.

1 Enter the menu and select “OPTION” - “R-Posi”.

2 Select “Fr End”.

To start recording over the current contents

Select “FrHere”.

z

•To temporarily record without recording over the current contents, press END SEARCH before the start of recording. The recording will begin after the last track, even if “R-Posi” is set to “FrHere” (factory setting). The remaining recordable time on the disc will appear in the display when you press END SEARCH.

•If the group recording setting (“G-REC”) is set to “G-ON”, the recorder will always set to “Fr End”.

Creating a new group when recording

By pressing N while pressing REC • T MARK, you can set the recorder to create a new group automatically each time you record. This is convenient when recording several CDs in succession.

1 While the recorder is stopped, enter the menu and select “R-SET” - “G-REC”.

2 Select “G-ON”.

To turn the setting to normal

Select “G-OFF”.

Starting the playback quickly (Quick Mode)

After pressing the playback button or cueing to the track, the playback can start quickly.

1 Enter the menu and select “OPTION” - “Power”.

2 Select “QUICK”.

Display window on the recorder

QUICK

To switch back to the normal setting

Select “NORMAL”.

continued

49