
Using the Mini Docking Station
✍If your notebook is in power saving mode, switch to normal mode before connecting a floppy disk drive to the Mini Docking Station.
1With the VAIO logo facing up, plug the cable firmly into the connector and both of the alignment posts in the guide holes.
2With the VAIO logo facing up, plug the FDD into the other end until it locks in place.
FDD Connecting
Floppy disk drive (supplied)
Mini Docking Station left side (supplied)
2 | 1 | Alignment posts |
|
Floppy disk drive cable (supplied)
✍When you connect the floppy disk drive to the floppy disk drive connector of the Mini Docking Station, you cannot use the PRINTER connector of the floppy disk drive cable. The printer can be connected to the printer port on the Mini Docking Station.
91