Using Power Saving Modes
To activate System Suspend mode
Press Fn+Esc, or press the power button and release it immediately. You can also use the Power Management utility or the Jog Dial control to enter System Suspend mode.
To return to normal mode
Press any key or the Power button for less than 4 seconds.
System Hibernation Mode
The state of the system is saved on the hard drive and power is turned off. The power indicator light is off in this mode.
To activate System Hibernation mode
To activate System Hibernation mode, press the key combination Fn+F12.
✍(Windows 2000) The “Save to Disk Manager” screen appears, and then the computer enters System Hibernation mode.
✍Do not move the notebook until its power indicator light turns off.
To return to normal mode
Turn on the computer by pressing the power button. The computer returns to its previous state.
✍When returning from System Hibernation mode, the system status stored on the hard disk is erased and the computer starts normally if you press the power button and hold for more than four seconds.
❑Time to return to normal mode
System Idle requires less time than System Suspend, and System Suspend requires less time than System Hibernation.
❑Power consumption
System Idle uses more power than System Suspend, and System Suspend uses more power than System Hibernation.
79
