1 Connector panel
1 ”Memory Stick” slot
2DC IN connector
3AUDIO IN
4 DV OUT S400 connector
6DC OUT 12V 9 AUDIO OUT
connector | connectors |
5 REMOTE | 8 VIDEO OUT connector |
connector | 7 TC connector and IN/OUT |
| |
| selector switch |
Overview 1 Chapter
aTALLY (back tally) indicator (red)
Lights up during recording. It will not light if the TALLY switch is set to OFF. This indicator also flashes to indicate warnings (see page 18) in the same manner as the REC/ TALLY indicator in the viewfinder.
For details, see “Operation Warnings” on page 165.
bTALLY switch
Set to ON to activate the TALLY indicator function.
cBattery attachment shoe
Attach a
For details about how to attach the battery or AC adaptor, see “Preparing a Power Supply” on page 31. For information about attaching a synthesized tuner, see “Attaching a UHF Synthesized Tuner” on page 42.
Note
For your safety, and to ensure proper operation of the camcorder, Sony recommends the use of the following battery packs:
dWRR connector
Connect a
For details, see “Attaching a UHF Synthesized Tuner” on page 42.
a“Memory Stick” slot
“Memory Stick” | “Memory Stick” |
access indicator |
|
Insert a “Memory Stick”. The “Memory Stick” access indicator lights up when the “Memory Stick” is being accessed for reading or writing.
For details about how to insert a “Memory Stick”, see “To insert a “Memory Stick”” on page 145.
For details about the types of “Memory Stick”, see “About a “Memory Stick”” on page 174.
Note
Do not remove a “Memory Stick” while the “Memory Stick” access indicator is lit. Doing so may cause a loss of data.
bDC IN (DC power input) connector (XLR type, 4-
pin, male)
To operate the camcorder using an AC power supply, connect an
Location and Function of Parts | 23 |
|
|