• Adding and deleting shot marks

Notes

•Locked clips are deleted along with other clips.

•Clips cannot be locked or unlocked when the Write Inhibit tab of the disc is set to the recording disabled position.

1 With the SUB CLIP indicator off, press the THUMBNAIL button, lighting the THUMBNAIL indicator.

The thumbnails of the clips on the disc appear.

2 Select the clip to lock (you can do this with the same

3Chapter

operations as step 2 of “Searching Using Thumbnails”

(page 76).

 

Playback and Recording

Clip to be locked

 

 

 

 

 

 

3 Hold down the SHIFT button and press the CLIP MENU button.

Then CLIP menu appears.

4 Use the SEL/SET button or MENU knob to select “LOCK/UNLOCK CLIP”, and then press the button or knob.

A lock confirmation screen appears. This screen displays clip names and clip titles.

To cancel the lock operation and return to the thumbnail screen

Use the SEL/SET button or MENU knob to select “CANCEL”, and then press the button or knob.

Alternatively, press the RESET button on the right side of the LCD monitor.

5 With “OK” selected, press the SEL/SET button or MENU knob.

You return to the thumbnail screen, and a lock icon appears on the thumbnail of the selected clip to show that it is locked.

Lock icon

You cannot delete locked clips, rename them, set their thumbnails, and so on. Unlock the clip if you want to perform any of these operations.

To lock clips with a shortcut operation You can lock clips without using the CLIP menu.

After carrying out step 2 in the procedure, press the STOP button with the SHIFT button held down (shortcut operation).

To unlock clips

Carry out step 2 of “Locking (Write-Protecting) Clips” to select a locked clip (one with the lock icon displayed on its thumbnail). Then do one of the following.

•Carry out steps 3 and 4 of “Locking (Write-Protecting) Clips.”

•Press the STOP button with the SHIFT button held down (shortcut operation).

To lock all clips

1 Carry out steps 1 and 3 of “Locking (Write- Protecting) Clips” to display the CLIP menu.

2 Use the SEL/SET button or MENU knob to select “LOCK OR DELETE ALL CLIPS”, and then press the button or knob.

A submenu screen appears.

3 Select “LOCK ALL CLIPS”, and then press the SEL/ SET button or MENU knob.

A confirmation screen appears.

4 With “OK” selected, press the SEL/SET button or MENU knob.

All clips are locked.

To unlock all clips

Carry out the procedure in “To lock all clips”, selecting “UNLOCK ALL CLIPS” in step 3.

82 Thumbnail Search