Settings Detailed and Displays Menu 5 Chapter
1 Display the OUTPUT page of the OPERATION menu, and press the MENU knob.
For details on menu operations, see “Basic Menu Operations” on page 129.
2 Select COMPONENT OUT, and press the MENU knob.
3 Select one of the following, and press the MENU knob.
AUTO: Switch between HD YPbPr and SD YPbPr, according to the recording format. This applies to both recording and playback.
HD YPbPr: Regardless of the recording format, output HD YPbPr when recording. Output SD YPbPr only when playing back DVCAM format.
SD YPbPr: Regardless of the recording format, output SD YPbPr. This applies to both recording and playback.
Setting the Color Temperature ManuallyYou can manually adjust the value of the white balance by setting the color temperature.
(How to select an item in the menu screen: Turn the MENU knob to move the b mark to the desired item.)
1 Display the WHITE page of the PAINT menu, and press the MENU knob.
For details on menu operations, see “Basic Menu Operations” on page 129.
2 Select the desired setting item, and press the MENU knob.
You can set the following items on the WHITE page.
Item | Description |
COLOR TEMP | Sets the color temperature for the |
<A> | desired value. Adjust the value |
| while looking at the real image |
| because error tends to be bigger |
| for adjustment of high color |
| temperature. |
|
|
C TEMP BAL <A> | Adjusts the value more precisely |
| when the color temperature |
| adjustment through COLOR |
| TEMP is not satisfactory. |
|
|
R GAIN <A> | Changes only the value of R |
| GAIN. |
|
|
B GAIN <A> | Changes only the value of B |
| GAIN. |
|
|
Item | Description |
D5600K<A> | Sets the color temperature to |
| approximately 5600K |
|
|
The above table shows the adjustment of the white balance of channel A. Items followed by <B> are used to adjust the white balance of channel B.
3 Turn the MENU knob to select the desired setting, and press the MENU knob.
4 Repeat steps 2 and 3 until you have set all of the desired items.
Specifying an Offset for the Auto White Balance SettingBy setting an offset for the value of auto white balance, you can make the picture warmer or colder.
(How to select an item in the menu screen: Turn the MENU knob to move the b mark to the desired item.)
1 Display the OFFSET WHITE page of the OPERATION menu, and press the MENU knob.
For details on menu operations, see “Basic Menu Operations” on page 129.
2 Select the desired setting item, and press the MENU knob.
You can set the following items in the OFFSET WHITE page.
Item | Description |
OFFSET WHITE | When this item is set to ON, the |
<A> | offset adjusted on this page is |
| added to the white balance for |
| channel A. |
|
|
When OFFSET WHITE <A> is | |
| ON, sets the offset for the white |
| balance of channel A, using the |
| color temperature. Adjust the |
| value while looking at the real |
| image because error tends to be |
| bigger for adjustment of high color |
| temperature. |
|
|
COLOR FINE <A> | Adjusts the value more precisely if |
| the adjustment by |
| <A> is not satisfactory. |
|
|
OFFSET WHITE | When this item is set to ON, the |
<B> | offset adjusted on this page is |
| added to the white balance for |
| channel B. |
|
|
140 Adjustments and Settings from Menus