|
| Preparations |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 Chapter |
|
|
|
| |
Preparations |
| the Lithium Battery |
|
| Attaching and Replacing |
This camcorder uses a lithium battery to retain stored data. When using the camcorder for the first time, be sure to attach the supplied lithium battery (CR2032). The camcorder will not operate correctly without this lithium battery. After attaching the lithium battery, set the date and time of the internal clock (see “Setting the Date and Time of the Internal Clock” on page 34).
Note
Use CR2032 lithium batteries only. Other types of lithium battery may come loose when the camcorder is subjected to vibrations. If you have difficulty finding CR2032 lithium batteries, contact your Sony dealer.
Catch | 2 |
| |
| Press down |
LITHIUM BATT and pull | |
| forward. |
Battery cover | |
Chapter2
3 Take out the lithium battery.
Press down and pull out toward you.
4 Reverse step 3 to insert a replacement lithium battery. Make sure that the + symbol on the battery is facing you.
5 Close the battery cover.
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble or dispose of in fire.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Bei der Entsorgung leerer Batterien sind die Anweisungen des Herstellers zu befolgen.
1
1 Set the POWER switch to OFF.
2 Press down the catch at the top of the battery cover and open the cover.
When the lithium battery’s voltage falls, the lithium battery low voltage warning appears on the LCD monitor (see page 16). If this warning appears, replace the lithium battery (CR2032) within three or four days.
The lithium battery has an average service life of about one year.
30 Attaching and Replacing the Lithium Battery