+NAME: The standard or
You can also use the supplied
3 Use the SEL/SET button or MENU knob to select a clip list number (E0001 and so on), and press the button or knob.
You can also move the cursor with the PREV and NEXT buttons.
When you have a large number of clip lists, you can use the following operations to move the cursor closer to the clip list that you want.
With the SHIFT button held down, press the PREV or NEXT button: Move to the first or last clip list.
Press the F REV or F FWD button: Move to previous or next page.
If you select a clip list number with a “NEW FILE”, an empty clip list is displayed as shown in the following figure.
4 Hold down the SHIFT button, and press the SEL/SET button down (CLIP MENU).
The CLIP menu appears.
5 Use the SEL/SET button or MENU knob to select “ADD”, then press the button or knob.
A screen as shown below appears.
(In the following description, this whole screen is referred to as the “scene selection screen”.)
To return to the CLIP menu
Press the RESET button on the right side of the LCD monitor.
6 Use the SEL/SET button
To make a multiple selection, hold down the SHIFT button, and turn the MENU knob.
An
If you press the RESET button at this point, you return to the state at the beginning of step 6.
7 Press the SEL/SET button or MENU knob.
The clip selected in the upper part is added to the current clip list in the lower part, as a sub clip. The screen returns to the CLIP menu (see step 4).
To continue working without returning to the CLIP menu
With the SHIFT button held down, press the SEL/SET button or the MENU knob.
You return directly to the scene selection screen of step 5.
8 Repeat steps 5 to 7 until all desired clips have been added to the current clip list.
You can add the same clip as a sub clip any number of times.
Selection Scene 4 Chapter
Creating Clip Lists 89