Data Setting User Loading and Saving 6 Chapter

Check that the access

Gently press in and release.

indicator is not lit.

 

2 Pull the “Memory Stick” towards you to withdraw it from the slot.

Note

Do not remove the “Memory Stick” while the access indicator is lit. You may lose data, or damage the “Memory Stick”.

To protect saved data

To prevent accidental erasure of important setup data, slide the LOCK switch on the “Memory Stick” right to the write protect position.

It is now impossible to write or delete data on the “Memory Stick”. If you try to do so, the message “MEMORY STICK LOCKED” appears and the data cannot be overwritten or deleted.

Notes on using and storing the “Memory Stick”

To use and store the “Memory Stick”, note the following points.

Avoid touching the connector of the “Memory Stick” or contacting it with a metal object.

When attaching a label to the “Memory Stick”, use only the label supplied for the “Memory Stick”.

Do not drop, bend, or submit the “Memory Stick” to external shock.

Do not disassemble or modify the “Memory Stick”.

Avoid getting liquids on the “Memory Stick”.

Avoid using or storing the “Memory Stick” in a location subject to:

-extremely high temperature such as the hot inside of a car or the outdoors exposed to a burning sun, or a place near a heater.

-direct sunlight.

When storing and carrying the “Memory Stick”, keep it in its original case to ensure protection of important data.

Do not format the “Memory Stick” using a PC. Format the “Memory Stick” on the MEMORY STICK page of the FILE menu.

Saving USER Menu Data (User File) to the “Memory Stick”

USER menu settings stored in the camcorder as user files can be saved to the “Memory Stick”.

You can save up to 100 user files to the “Memory Stick”. Insert the “Memory Stick” into the “Memory Stick” slot, then proceed as follows.

(How to select an item in the menu screen: Turn the MENU knob to move the b mark to the desired item.)

1 Display the USER FILE page of the FILE menu, and press the MENU knob.

For details on menu operations, see “Basic Menu Operations” on page 129.

F01 USER FILE

TOP

USER FILE LOAD : EXEC

USER FILE SAVE : EXEC

F.ID : ssssssssssssssss

USER PRESET

: EXEC

To set a file ID for the data to be saved

Set the file ID before going to step 2.

For details on setting the file ID, see “To set the file ID” on page 147.

2 Select USER FILE SAVE, and press the MENU knob.

The USER SAVE page appears.

?P00

USER

SAVE

 

ESC

DISPLAY

MODE

:

ALL

001

.NEW

FILE

 

 

002

.NEW

FILE

 

 

003

.NEW

FILE

 

 

004

.NEW

FILE

 

 

005

.NEW

FILE

 

 

Up to 20 pages, from P00 to P19, can be used to save user files to the “Memory Stick”. Each page can hold up to five files.

3 Turn the MENU knob until the page which contains the desired file number appears, and press the MENU knob.

146 Saving and Loading User Files