Sony PDW-F335KL, PDWF335L To set the file ID

P00 USER	SAVE		ESC
DISPLAY	MODE	:	ALL

001.NEW FILE

002.NEW FILE

003.NEW FILE

004.NEW FILE

005.NEW FILE

4 Select the desired file number, and press the MENU knob.

The message “SAVE OK? YES b NO” appears.

P00	USER	SAVE		ESC	If a file number is
SAVE		OK?	YES	NO
					followed by “NEW
DISPLAY		MODE	:	ALL
001	.NEW	FILE			FILE”, this means
002	.NEW	FILE			that the file is empty.
003	.NEW	FILE
004	.NEW	FILE			If data is stored in the
005	.NEW	FILE
					file, the file number is
					followed by the file
					name.

5 To carry out the save, select YES and press the MENU knob.

To cancel, press the MENU knob leaving b pointing to NO.

The access indicator lights. When the saving is completed, the message “COMPLETE” appears and the access indicator goes off.

If no “Memory Stick” has been inserted, the message “NO MEMORY STICK” will appear. Insert a “Memory Stick”, and carry out the operation once again.

If you select a file number where data has already been saved

The message “OVERWRITE OK? YES b NO” appears.

•To stop overwriting, press the MENU knob leaving b pointing to NO.

•To overwrite, select YES and press the MENU knob.

You can select the information displayed on each USER SAVE or USER LOAD page.

For details, see “To select the file information items to be displayed” on page 148.

About the USER menu settings to be saved in the “Memory Stick”

Settings for items on all pages of the USER menu are saved in the “Memory Stick” as a user file.

If data cannot be saved

If one of the following error messages appears during or after the save operation, then the data was not saved.

Error message	Cause	Action
NO MEMORY	No “Memory Stick”	Insert or reinsert
STICK (flashing)	is inserted.	the “Memory
		Stick”.
MEMORY STICK	The LOCK switch	Set the LOCK
LOCKED	on the “Memory	switch to the write
	Stick” is set to the	enable position.
	write protect
	position.
MEMORY STICK	Circuit or “Memory	Recheck and
ERROR (flashing)	Stick” fault.	consult your Sony
		dealer.

To set the file ID

Before data is saved to a “Memory Stick”, it is useful to set a file ID for the “Memory Stick” to identify it.

When data is saved to a “Memory Stick”, the file ID is saved to the “Memory Stick” together with the data.

Note

Set the file ID before saving data in the “Memory Stick”. Otherwise, the file ID is not saved with the other data.

(How to select an item in the menu screen: Turn the MENU knob to move the b mark to the desired item.)

1 Display the USER FILE page of the FILE menu, and press the MENU knob.

For details on menu operations, see “Basic Menu Operations” on page 129.

2 Select F. ID, and press the MENU knob.

A character table appears.

F01	USER	FILE		TOP
USER	FILE	LOAD	:	EXEC
USER	FILE	SAVE	:	EXEC
F.ID	:?x

i#$%&'()*+,-./012345678 9:;<=>?@ABCDEFGHIJKLMNOP

QRSTUVWXYZ[	]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET	ESC END

3 Follow steps 3 and 4 described in “Setting the Shot ID” on page 137 to enter characters.

4 When you have finished entering the file ID, turn the MENU knob to move x to END, and press the MENU knob.

The entered file ID is now displayed.

Data Setting User Loading and Saving 6 Chapter

Saving and Loading User Files 147