the unit is powered from an external battery (a battery connected to the DC IN connector), indicates the power source voltage.
When the DISP BATT REMAIN item is set to “INT” on the VF DISP 1 page of the OPERATION menu, the battery voltage is not indicated.
However, when the Anton Bauer intelligent battery system or the
•Until the remaining battery capacity is reduced to 40%, the indications MAX, 90%, 80%...40% are displayed for three seconds in the viewfinder each time the remaining battery capacity reduces by 10%.
•When the remaining battery capacity is less than 40%, the indication is displayed all the time.
•When the remaining battery capacity is less than 10%, the indication flashes. When the remaining battery capacity is reduced further, the “LOW” flashes.
gClip list name
Displays the name (E0001 to E0099) of the currently selected clip list.
h5600 indicator
Appears when the electric color temperature filter function is on.
iFilter
Indicates the currently selected filter type.
jWhite balance memory
Indicates the currently selected white balance automatic adjustment memory.
A:Displayed when the WHITE BAL switch is set to A.
B:Displayed when the WHITE BAL switch is set to B.
P:Displayed when the WHITE BAL switch is set to PRST or when the preset button on an
T:Displayed when ATW is being used.
kGain value
Indicates the gain value (in dB) of the video amplifier, as set by the GAIN switch.
lShutter speed
Indicates the shutter speed or the shutter mode. However, if the SHUTTER switch (see page 13) is set to OFF, nothing is displayed.
For details of the displayed shutter speed, see “Setting the Electronic Shutter” on page 57.
mOperation/alarm message display area
For details, see “Operation/alarm messages” on page 166.
nAudio level
Indicates the level of audio channel 1 and channel 2. The peak indication of the VDR level meter is related as follows to the audio level.
For example, the level of the internal 1 kHz sine wave signal is
Audio channel 1 level indicator 
Audio channel 2 level indicator 
VDR level meter indicator 
oRemaining disc capacity
Indicates the remaining recording time (in minutes) of the disc.
Examples of remaining recording time indication
Indication | Remaining recording time | |
90 | < | More than 90 minutes |
|
|
|
90 | - 85 | 90 to 85 minutes |
|
|
|
85 | - 80 | 85 to 80 minutes |
|
|
|
. |
| . |
. |
| . |
. |
| . |
20 | - 15 | 20 to 15 minutes |
|
|
|
15 | - 10 | 15 to 10 minutes |
|
|
|
10 | - 5 | 10 to 5 minutes |
|
| |
5 - 0 | 5 to 0 minutes | |
|
| |
No display | 0 minute | |
|
|
|
As shown below,
Indication | Remaining recording time |
250 < | More than 250 minutes |
|
|
240 < | More than 240 minutes |
|
|
230 < | More than 230 minutes |
|
|
pRemaining clips display
Displays the remaining number of clips that can be recorded. The display flashes once per second when the number of remaining clips is less than 10.
qIris setting/auto iris override
Indicates the F value (iris setting) of the lens.
Also, the auto iris override is displayed using two squares which appear in the upper and lower parts respectively.
For details, see “Adjusting the Iris” on page 59.
rSetting change and adjustment progress message display area
For details, see “Change Confirmation/Adjustment Progress Messages” on page 135.
Overview 1 Chapter
Location and Function of Parts | 29 |
|
|