Settings Detailed and Displays Menu 5 Chapter
Situation | Message to appear |
The shutter speed and mode | SHUTTER: 1/100 (or 1/125, |
setting has been changed 1) | 1/250, 1/500, 1/1000, 1/2000, |
| ECS, SLS) |
|
|
The black or white balance | E.g. WHITE: OK |
has been adjusted |
|
|
|
1)The corresponding message is also displayed for about 3 seconds when the SHUTTER switch is set to ON.
Setting the Marker DisplayYou can switch the display of the center and safety zone markers on or off and select whether the area indicated by the safety zone marker is 80%, 90%, 92.5%, or 95% of the screen area.
(How to select an item in the menu screen: Turn the MENU knob to move the b mark to the desired item.)
1 Display the MARKER page of the USER (or OPERATION) menu, and press the MENU knob.
For details on menu operations, see “Basic Menu Operations” on page 129.
2 Select the desired setting item, and press the MENU knob.
You can set the following items on the MARKER page.
Item | Description |
MARKER | If you want no markers to be |
| displayed, set to OFF. |
|
|
CENTER | To display the center marker, set |
| to ON. |
|
|
SAFETY ZONE | To display the safety zone, set to |
| ON. |
|
|
SAFETY AREA | Selects the safety zone area. |
|
|
ASPECT | To display the aspect marker, set |
| to ON. |
|
|
ASPECT SELECT | Selects the type of the aspect |
| marker. (14:9/13:9/4:3) |
|
|
3 Turn the MENU knob to select the desired setting, and press the MENU knob.
4 Repeat steps 2 and 3 until you have set all of the desired items.
You can make settings for viewfinder screen display functions.
(How to select an item in the menu screen: Turn the MENU knob to move the b mark to the desired item.)
1 Display the VF SETTING page of the USER (OPERATION) menu, and press the MENU knob.
For details on menu operations, see “Basic Menu Operations” on page 129.
2 Select the desired setting item, and press the MENU knob.
You can set the following items on the VF SETTING page.
Item | Description |
ZEBRA | Turns the zebra display ON or |
| OFF. 1) |
ZEBRA SELECT | Selects ZEBRA 1, ZEBRA 2 or |
| BOTH. |
|
|
ZEBRA 1 DET. LVL | Adjusts the level of the ZEBRA 1 |
| display (30% to 107%). (Factory |
| default setting is 70%.) |
|
|
PEAKING | For viewfinder image adjustments |
VOL.LINK | made with the PEAKING control, |
| switches between linkage (ON) |
| and no linkage (OFF) of peaking |
| adjustment and detail level |
| adjustment. |
|
|
H DETAIL LEVEL | Adjusts the H detail of the |
| viewfinder image. |
|
|
V DETAIL LEVEL | Adjusts the V detail of the |
| viewfinder image. |
|
|
DETAIL FREQ | Turns the VF detail function on or |
| off and adjusts the frequency. |
| (NORM/HIGH) |
|
|
VF ASPECT | Selects the viewfinder aspect ratio |
| (AUTO/4:3). 2) |
1)When you use the viewfinder which is not equipped with a ZEBRA switch, turns the display on or off using this item. When you use the viewfinder with a ZEBRA switch, the switch operation and the operation of this menu are both effective (the most recent operation prevails).
2)When the VF ASPECT item is set to AUTO, this is linked to the setting of the “ASPECT RATIO (DV)” item on the FORMAT page.
3 Turn the MENU knob to select the desired setting, and press the MENU knob.
4 Repeat steps 2 and 3 until you have set all of the desired items.
136 Setting the Status Display on the Viewfinder Screen and the LCD Monitor