Parts of Functions and Names 2 Chapter

An In or Out point is set when you press the SET button with the G/IN or g/OUT button held down. The In or Out point setting is deleted when you press the RESET button with the G/IN or g/OUT button held down.

cIN indicator and OUT indicator

IN indicator: When an IN point can be set, this flashes, and when the IN point is set it changes to continuously lit.

If an attempt is made to set the IN point after a recorded OUT point, this flashes rapidly.

OUT indicator: When an OUT point can be set, this flashes, and when the OUT point is set it changes to continuously lit.

If an attempt is made to set the OUT point before a recorded IN point, this flashes rapidly.

3Operating mode selection/menu setting section

1SUBCLIP button

2THUMBNAIL button

3 MENU button

4 SET button

SUBCLIP

THUMBNAIL

MENU

SET

RESET SHIFT

CLIP

ESSENCE SYSTEM

S.SEL

MARK1

MENU

MARK

MENU

 

 

5RESET button

6SHIFT button

aSUBCLIP button

Press this button, turning it on, to play back following a clip list. This is also valid for jog and shuttle operations. To play the clips in the order they are recorded, press this again, turning it off.

Note

If no clip list is registered, this button does not light when pressed. The operation is invalid.

bTHUMBNAIL button

To carry out a thumbnail search or scene selection, press this button turning it on. Thumbnail images representing each clip appear. Press once more to turn the button off, and return to a whole-screen display.

To display the thumbnails of essence mark frames (frames with an essence mark attached), hold down the SHIFT button, and press this button. The essence mark selection menu appears. Select the desired type of essence mark, and the corresponding essence mark frames appear in thumbnails. Press once more, turning the button off, to return to a whole-screen display.

cMENU button

Use for setup menu operations. Pressing this displays the setting of a setup menu item in the time data display. Press once more to return to the original display.

dSET button

Use for setup menu settings, scene selection (thumbnail) settings, and so on.

eRESET button

Press to reset the counter. This is also used to cancel setup menu settings and abandon scene selection (thumbnail).

fSHIFT button

Use to switch the functions of various buttons.

4 Playback controls

1 PREV button

2PLAY button

3 NEXT button

PREV PLAY NEXT STOP

TOP F REV

F FWD END

4STOP button

aPREV (previous) button

Press this, turning it on, to show the first frame of the current clip. While the first frame of a clip is shown, pressing this button jumps to the beginning of the previous clip.

This button is also used together with other buttons for the following operations.

Reverse direction high-speed search: Hold down the PLAY button, and press this button. A high-speed search in the reverse direction is carried out.

Displaying the first frame of the first clip: Hold down the SHIFT button, and press this button.

bPLAY button

To start playback, press this button, turning it on.

cNEXT button

Press this, turning it on, to show the first frame of the next clip.

This button is also used together with other buttons for the following operations.

Forward direction high-speed search: Hold down the PLAY button, and press this button. A high-speed search in the forward direction is carried out.

Displaying the last frame of the last clip: Hold down the SHIFT button, and press this button.

22 2-2 Control Panel