Playback 4 Chapter
4-4Clip List Playback
You can play back clips in the order of clip lists created with the scene selection function (see page 45).
4-4-1 Playing Back in Clip List Order
Proceed as follows.
1 If the clip list that you want to play exists on the disc, load it into the current clip list.
About the current clip list, see page 45.
For the clip list loading operation, see
2 Press the SUBCLIP button, turning it on.
3 Press the PLAY button.
Playback begins from the first sub clip in the current clip list.
Note
Depending on the length of sub clips in the clip list and their arrangement on the disc, playback may freeze momentarily between sub clips.
4-4-2 Cuing Up With Sub Clip Thumbnails
With the desired clip list loaded in the current clip list, proceed as follows.
1 Press the SUBCLIP button and the THUMBNAIL button, turning them on.
Thumbnails of the first frames in the sub clips appear.
| Sixth frame is selected |
Title of current clip list | from a total of 34 sub clips |
Total duration of sub clips in clip list
Currently selected sub clip
Recording date and time of | Duration of selected sub clip |
selected sub clip |
|
To escape from the thumbnail display to the full- screen display
Press the THUMBNAIL button, turning it off.
2 Use the arrow buttons or the jog dial to select the sub clip you want to cue up.
You can select sub clips with the following operations. Press the PREV or NEXT button: Move to the
previous or next sub clip.
Press the PREV or NEXT button with the SHIFT button held down: Move to the first or last sub clip.
Press the F or f button with the SHIFT button held down: Switch to the previous or next page.
3 To cue up the selected sub clip, press the SET button.
To start playback from the selected sub clip, press the PLAY button.
44