To change the currently displayed
The
To abandon making a change
Press the MENU button before pressing the SET button.
The menu display disappears from the image display and status display without the new setting value being saved.
Resetting the menu settings to their factory default valuesTo reset the current active menu settings to their factory default values, do as follows.
1 3 2
SHUTTLEJOG
AUDIO MONITOR
L L
R R
To change the setting value of the currently displayed menu item, do as follows.
ACCESS
NETWORK LOCAL REMOTE
SUB
CLIP THUMBNAIL MENU SET RESET SHIFT
2 1
SHUTTLEJOG
AUDIO MONITOR
L L
R R
| CLIP | ESSENCE SYSTEM S.SEL | MARK1 | |
| MENU | MARK | MENU |
|
PREV | PLAY | NEXT | STOP |
|
|
|
| IN | OUT |
TOP F REV | F FWD END |
MARK2
1 Press the MENU button.
ACCESS
NETWORK LOCAL REMOTE
SUB
CLIP THUMBNAIL MENU SET RESET SHIFT
The menu appears in the image display and status
Menus 7 Chapter
| CLIP | ESSENCE SYSTEM S.SEL | MARK1 | |
| MENU | MARK | MENU |
|
PREV | PLAY | NEXT | STOP |
|
|
|
| IN | OUT |
TOP F REV | F FWD END |
MARK2
1 Hold down the SHUTTLE button, and turn the jog dial or shuttle dial.
The setting value changes at a rate depending on the jog dial rotation rate or on the shuttle dial position.
Setting value (flashing while changing)
2 When the desired setting value is displayed, press the SET button.
This saves the new setting value, and the menu display disappears from the image display and status display.
display.
2 Press the RESET button.
A message “INITIALIZE ALL ITEMS TO FACTORY RESET VALUES?” appears in the image display and a message “Init setup” appears in the status display.
To abandon operations and return to the setup menu display
Press the RESET button again.
3 Press the SET button.
The menu settings are reset to their factory default settings.
Switching betweenTo switch between
1 Press the MENU button.
2 Turn the jog dial or shuttle dial to display menu item 013 in the time data display.
70