Sony PDW-V1 manual 63

Command name	Description				Command syntax
STOR		Begins transfer of a copy of a file in the			STOR <SP> <path-name> <CRLF>
		specified path on the remote computer
		to the current directory on this unit.			Input example: STOR Data/E0001E01.SMI
		Depending on the type of file
		transferred, the following items are
		created.
		•	C*.MXF file
			-	C*M01.XML file (metadata)
			-	C*S01.MXF file (proxy AV data)
			-	UMID (The UMID of the copy
				source file is not saved. However, it
				is saved if an immediately
				preceding SITE UMMD extended
				command has been issued.)
		•	E*E01.SMI file
			-	E*M01.XML file (metadata)
		*: 0001 to 0300
		Notes
		• For C*.MXF files, some data, such as
			file header metadata, may be
			missing.
		•	Depending on the transfer
			destination directory and the file type,
			transfer may not be possible.
		•	No transfer is made if the numbering
			rules of the C*.MXF file specified with
			the STOR command do not match
			those of the XDCAM equipment.
		For details, see 6-1-2 “File Operation
		Restrictions” (page 56).
RNFR		Rename a file. Specify the file to be			RNFR <SP> <path-name (before change)> <CRLF>
RNTO		renamed with the RNFR command,			RNTO <SP> <path-name (after change)> <CRLF>
		and specify the new name with the			Input example: RNFR General/info.txt
		RNTO command. (Always follow a
		RNFR command with a RNTO			RNTO General/clip_info.txt
		command.)
		Note
		Files in directories other than the
		General directory cannot be renamed.
		For details, see 6-1-2 “File Operation
		Restrictions” (page 56).
DELE		Deletes the specified file on this unit.			DELE <SP> <path-name> <CRLF>
		Note			Input example: DELE Clip/C0099.MXF
		Depending on the directory and file
		type, deletion may not be possible.
		For details, see 6-1-2 “File Operation
		Restrictions” (page 56).

Operations File 6 Chapter

6-3 FTP File Operations 63