3 Hold down the SHUTTLE button, and turn the jog dial or shuttle dial to set menu item 013 to “on.”
4
5 Hold down the SHUTTLE button, and turn the jog dial or shuttle dial to select the line mode 525(U), 525(J) or 625.
6
7 Turn the unit off (move the on/standby switch to the 1 position to put the unit in the standby state).
Next time the unit is turned on (when the unit is put in the operating state by moving the on/standby switch to the @ position), it operates in the new mode.
Menu bank operations (menu items B01 to B13)This unit allows menu settings to be saved in what are termed “menu banks.” Saved sets of menu settings can be recalled for use as required.
To jump to menu item B01
You can recall any required menu by turning the jog dial or shuttle dial after pressing the MENU button.
If you press the MENU button first, then the COUNTER button, you can jump directly to menu item B01 or H01. The recalled menu item toggles between B01 and H01 every time you press the COUNTER button.
Saving the current active menu settings
Set one of menu items B11 “SAVE SETUP
Recalling settings from a menu bank
Set one of menu items B01 “RECALL SETUP
|
|
| Recall |
| ||
Current active |
|
|
|
|
| Menu bank 1 |
|
|
|
|
| ||
menu settings |
| Save | ||||
|
| |||||
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recall
Save | Menu bank 2 |
|
Recall |
| ||
|
| Menu bank 3 | |
Save | |||
| |||
|
|
| |
Note
The following message appears if the line mode of the menu bank that you are about to recall differs from the current line mode.
Message in time data display
RECALL SETUP
System will be changed. Are you sure you want to execute?
EXECUTE | : | SET | KEY |
ABORT | : | MENU | KEY |
Message on image display
Press the SET button to recall the settings and switch to the line mode saved in the menu bank. When you power the unit off and then on again, it will use the line mode and settings of the selected bank.
To cancel the recall, press the MENU button.
Menus 7 Chapter