Sony PDW-V1 manual 91

Message in time	Display	Description	Action
data display	condition a)
Formatting!	off	An attempt was made to display the	Wait until the end of the auto format.
		DISC MENU page in the system menu
		during an auto format.
Disc Damage	off	An attempt was made to record, display	This disc cannot be recorded. Exchange
		an E-E picture, record an essence mark,	the disc.
		or add a quick scene selection sub clip
		when there was no free sparing area.
Non AV Full	off	An attempt was made to record, display	Insert a different disc with enough free
		an E-E picture, record an essence mark,	capacity.
		or add a quick scene selection sub clip
		when there was no free Non-Real-Time
		space.
a) With respect to setting of basic menu item 016

During reception of commands from an external device connected to the REMOTE connector

Message in time	Display	Description	Action
data display	condition a)
MAX# SB CLP	off	A command was received to add a sub	These operations are not possible.
		clip when the number of registered sub
		clips had already reached the upper limit
		(300) of the specifications of this unit.
CL OVER DUR	off	A command was received to add a sub
		clip when the total duration of sub clips in
		the clip list had already reached the
		upper limit (24 hours) of the
		specifications of this unit.
Non AV Full	off	A command was received to record,	Insert a different disc with enough free
		display an E-E picture, record an	capacity.
		essence mark, or add a quick scene
		selection sub clip when there was no free
		Non-Real-Time space.
No Disc!	on	A recording, playback, search, or other	Try the operation again after loading a
		command was received with no disc	disc.
		loaded.
No Clip!	limit	A playback or search command was	These operations are not possible.
		received for a disc containing no
		recorded clips.
Disc Top!	limit	A PREV or reverse high-speed search
		command was received with the disc
		stopped at the top.
Disc End!	limit	A NEXT or forward high-speed search
		command was received with the disc
		stopped at the end.
a) With respect to setting of basic menu item 016

Alarms relating to sensors and drives

Message in time	Display	Description	Action
data display	condition a)
HUMID!	off	Condensation was detected in the unit.	See 8-4 “Condensation” (page 93).

Troubleshooting and Maintenance 8 Chapter

8-3 Alarms 91