|
|
This unit can be powered by a battery pack or AC power.
3-2-1 Using AC Power
Connect an AC power source (100 V to 240 V AC, 50/60 Hz) to the AC power inlet connector on the left side of the unit with a power cord (not supplied, see page 95).
3-2-2 Using a Battery Pack
Usable battery packs
The battery packs usable with this unit are as follows.
To attach a battery pack
Proceed as follows.
1 Remove the cover of the battery pack shoe.
2
1
2 Fit the battery pack.
The principal setup operations before operating this unit can be carried out using setup menus.
The setup menus of this unit comprise a basic setup menu and an extended setup menu. The contents of these menus are as follows.
Basic setup menu:
•Items relating to the hours meter
•Items relating to operation
•Items relating to menu banks
Extended setup menu:
•Items relating to control panels
•Items relating to the remote control interface
•Items relating to editing operations
•Items relating to preroll
•Items relating to disc protection
•Items relating to the time code reader, metadata, and
UMID
•Items relating to video control
•Items relating to audio control
•Items relating to digital processing
For detailed information about the items, except for the basic menu items relating to the hours meter, of these menus and how to use them, see Chapter 7 “Menus.” For detailed information about menu operations relating to the hours meter, see
This unit allows three different sets of menu settings to be saved in what are termed “menu banks” numbered 1 to 3. Saved sets of menu settings can be recalled for use as required.
For more information about the menu banks, see “Menu bank operations (menu items B01 to B13)” (page 71).
Preparations 3 Chapter
To remove the battery pack.
Follow the above procedure in the reverse flow. After the battery pack is removed, replace the cover of the battery pack shoe.
33 | |
|
|