Parts of Functions and Names 2 Chapter
c
The factory default setting is
dTC/VITC (time code display selection) button When the time data display is set to TC (time code display), this selects whether to display TC or VITC time code. The TC or VITC indicator in the time data display lights to reflect the selection.
The factory default setting is TC.
eCOUNTER (time data display selection) button Switches the data shown in the time data display through TC, UB, and COUNTER in sequence.
TC: Playback time code read by the internal time code reader
The selection of TC or VITC is made by the TC/VITC button.
UB: User bits included in the playback time code
COUNTER: The elapsed playback time (hours, minutes, seconds, frames). This can be reset by pressing the RESET button (see page 22).
The corresponding indicator in the time data display lights to reflect the setting.
The factory default setting is TC.
fCHARACTER button
Selects whether or not to superimpose the time code, menu settings, alarm messages, or other text information on the video signals output from the side panel SDI OUT, VIDEO OUT and MONITOR connectors and also on the unit’s image display. Every time you press this button, the setting alternates.
The factory default setting is for superimposing text information.
gWARNING indicator
This lights when a fault occurs in the
For details, see
26