Sony PDW-V1 2-3LCD Panel, 1 Status display (monochrome)

Parts of Functions and Names 2 Chapter

2-3 LCD Panel

1 Image display (color) 1 Status display (monochrome) (see page 24)

DATA	DATA	DATA	DATA	VITC VIUB COUNTER VITC				ALARM
dB OVER	dB OVER	dB OVER	dB OVER
0	0	0	0
-12	-12	-12	-12
-20	-20	-20	-20	HOURS	MINUTES	SECONDS		FRAMES
-30	-30	-30	-30	AUDIO		625	IMX[50 40 30 ]
-40	-40	-40	-40
-60	-60	-60	-60	48CH	16 24 BIT	525	DVCAM
CH- 15	CH- 26	CH- 37	CH- 48	BATT	E			F

2 Display setting section and WARNING indicator (see page 25)

2Indicators on the back of the LCD panel

aImage display (color)

In playback and editing operations, this shows the playback video, clip thumbnail images, and so on.

bIndicators on the back of the LCD panel There are two indicators, as follows.

ACCESS

ACCESS indicator

"/1 indicator

"/1 (on/standby) indicator: Lights when the on/standby switch on the control panel is in the on (") position.

ACCESS indicator: Lights when the disc is being accessed. If the on/standby switch is set to the 1 position while this indicator is lit, access to the disc is completed before the unit switches to the standby state.

Note

While the ACCESS indicator is lit, do not turn off the AC power switch, disconnect the power cord, or remove the battery. This could lead to a loss of data from the disc.

1 Status display (monochrome)

1 Audio level meters

2 Time data display

DATA	DATA	DATA	DATA	VITC VIUB COUNTER VITC				ALARM
dB OVER	dB OVER	dB OVER	dB OVER
0	0	0	0
-12	-12	-12	-12
-20	-20	-20	-20	HOURS	MINUTES	SECONDS		FRAMES
-30	-30	-30	-30	AUDIO		625	IMX[50 40 30 ]
-40	-40	-40	-40
-60	-60	-60	-60	48CH	16 24 BIT	525	DVCAM
CH- 15	CH- 26	CH- 37	CH- 48	BATT	E			F

3AUDIO indicators

4 BATT display

5 525/625 indicator

6 Disc loaded mark

7 IMX/DVCAM indicator

aAudio level meters

These show the audio levels for channels 1 to 4 or channels 5 to 8. When the audio level exceeds 0 dB on any channel, the OVER indicator for that channel lights.

24 2-3 LCD Panel