To escape from the thumbnail display to the full- screen display
Press the THUMBNAIL button, turning it off.
3 Use the arrow buttons or jog dial to select the desired sub clip.
You can select sub clips with the following operations. Press the PREV or NEXT button: Move to the
previous or next sub clip.
Press the PREV or NEXT button with the SHIFT button held down: Move to the first or last sub clip.
Press the F or f button with the SHIFT button held down: Switch to the previous or next page.
4 Hold down the SHIFT button, and press the SET button.
The sub clip operation menu appears.
To return to the thumbnail display without moving the sub clip
Do either of the following.
•Use the arrow buttons to select EXIT, and press the SET button.
•Press the RESET button.
5 Use the arrow buttons to select MOVE, and press the SET button.
The sub clip movement screen appears. The sub clip selected in step 3 appears surrounded by a frame.
This shows that third sub clip is moved to the position of eighth sub clip.
Cursor showing the position to which the selected sub clip is moved
To escape from the sub clip movement screen to the previous screen
Press the RESET button.
6 Use the arrow buttons or the jog dial to move the cursor to the position where you want to move the selected sub clip.
Note
You can press the THUMBNAIL button to return to
7 Press the SET button.
The sub clip thumbnail display appears, and you can check the new position of the sub clip.
Trimming a sub clipProceed as follows.
Selection Scene 5 Chapter