1 In the CLIP menu, use the up and down arrow buttons to move the cursor to DELETE and press the right arrow button.
A list of clip lists appears.
The date of creation or the title of each clip list is shown in the list of clip lists. (The date of creation is always shown for clip lists without titles.)
To switch between the date and the title Hold down the SHIFT button and press the SET button.
2 Use the up and down arrow buttons or the jog dial to select the name of the clip list to delete and press the right arrow button.
A confirmation message like the one shown below appears.
DELETE CLIP LIST
DELETE E0001 OK?
DELETE : SET KEY
TO MENU : MENU KEY
3 Press the SET button.
The selected clip list is deleted from the disc.
5-3-5 Clearing the Current Clip List
Proceed as follows to clear the current clip list, leaving it with no clip list loaded.
1 In the CLIP menu, use the up and down arrow buttons to move the cursor to CLEAR and press the right arrow button.
A message like the following appears.
CLEAR CLIP LIST
CLEAR OK?
CLEAR : SET KEY
TO MENU : MENU KEY
2 Press the SET button.
The current clip list is cleared, leaving it with no clip list loaded.
5-3-6 Setting the Start Timecode of the Current Clip List
The start timecode (LTC) of the current clip list is set to 00:00:00:00 when the unit is powered on and when a disc is inserted.
You can set the start timecode to any value. Proceed as follows.
1 In the CLIP menu, use the down arrow button to select TC PRESET and press the right arrow button.
A screen like the one shown below appears.
CLIP LIST TC PRESET
00:00:00:00
INC/DEC : JOG DIAL
SHIFT : (
)(
) KEY
DATA SAVE : SET KEY
TO MENU : MENU KEY
2 Repeat the following operations to set any LTC value.
•Use the left and right arrow buttons to select a digit.
•Rotate the jog dial to set the digit to any value.
3 Press the SET button.
The starting timecode of the current clip list is set to the specified LTC value. The count starts from that value when playback starts.
Selection Scene 5 Chapter
53 | |
|
|