Troubleshooting and Maintenance 8 Chapter
When the unit is powered on
Message in time | Display | Description | Action |
data display | condition a) |
|
|
MENU Ver.UP | off | Setup menu settings were reset, | Reset the setup menu items. |
|
| because this unit was upgraded. | |
|
|
| |
|
|
| |
|
|
| Operatoins” (page 75) for information |
|
|
| about making setup menu settings. |
|
|
| Maintenance menu item “SETUP |
|
|
| MAINTENANCE” - “SAVE MENU |
|
|
| DATA/LOAD MENU DATA” (see page |
|
|
| 80) can be used to temporarily back up |
|
|
| and restore the current menu settings. |
|
|
|
|
ILL. SETUP! | off | Setup menu data is invalid, or data | Reset the items in the setup menu. |
|
| recalled with the maintenance menu item |
|
|
| “SETUP MAINTENANCE” - “AUTO |
|
|
| BANK RECALL” is invalid. |
|
|
|
|
|
Exchg batt! | off | NVRAM battery is exhausted. | It is time to exchange the battery on the |
|
|
| board. Contact your Sony service |
|
|
| representative. |
|
|
|
|
LOW BATT! | off | Battery pack power is low. | Exchange with a charged battery pack. |
|
|
|
|
BATT EMPTY! | off | Battery pack power is exhausted. | |
|
|
| |
|
|
| 33) for more information about |
|
|
| exchanging battery packs. |
a) With respect to setting of basic menu item 016 |
|
|
When a disc is inserted
Message in time | Display | Description | Action |
data display | condition a) |
|
|
Unknown FS! | off | The loaded disc was formatted by an | Eject or format the disc. |
|
| unknown file system. | |
|
|
| |
|
|
| for more information about formatting. |
|
|
|
|
No FS! | off | The file system cannot be detected. | Eject the disc. |
|
|
|
|
ILL. Disc! | off | An unsupported disc was inserted. |
|
|
|
|
|
Salvage NG | off | Recovery of disc contents (salvage) | |
|
| failed. | |
525/60 Clip | limit | A disc recorded in NTSC format was | Use a disc recorded with the PAL |
|
| inserted when this unit is in 625 line | system. |
|
| mode (PAL system). |
|
|
|
|
|
625/50 Clip | limit | A disc recorded in PAL format was | Use a disc recorded with the NTSC |
|
| inserted when this unit is in 525(U) or | system. |
|
| 525(J) line mode (NTSC system). |
|
|
|
|
|
IMX50 Clip | limit | The recording format of the loaded disc | To record on the disc, change the setting |
IMX40 Clip |
| differs from the format specified with | of basic menu item 031. |
IMX30 Clip |
| basic menu item 031 “RECORDING | |
DVCAM Clip |
| FORMAT.” | |
|
|
| (page 69) about how to change this |
|
|
| setting. |
4CHx/24 Clip | limit | The number of channels and quantizing | To record on the disc, change the setting |
8CHx16 Clip |
| bits of the loaded disc differ from the | of maintenance menu item “AUDIO |
|
| specifications of maintenance menu item | CONFIG” - “DATA LENGTH.” |
|
| “AUDIO CONFIG” - “DATA LENGTH.” | |
|
|
| |
|
|
| Operations” (page 81) about how to |
|
|
| change this setting. |
|
|
|
|
88