Message in time

Display

Description

Action

data display

condition a)

 

 

ILL. Index!

off

An index file error was detected.

Format the disc.

 

 

 

For details, see 3-6-5 “Formatting a Disc”

 

 

 

(page 37).

 

 

 

 

FORMAT NG!

off

Automatic format failed.

Use another disc.

 

 

 

 

DISC ERROR!

limit

A disc error occurred during write back.

This disc cannot be recorded. Exchange

 

 

Data could not be recorded normally.

the disc.

 

 

 

 

DI read err

off

A disc read error occurred.

Try ejecting the disc and inserting it

 

 

 

again, or insert another disc.

DRV ADJ err

off

Adjustment processing failed when a

 

 

 

disc was inserted.

 

 

 

 

 

a) With respect to setting of basic menu item 016

 

 

During playback

Message in time

Display

Description

Action

data display

condition a)

 

 

525/60 Disc

limit

An attempt was made to play back a disc

Use a disc recorded with the PAL

 

 

recorded with the NTSC system when

system.

 

 

this unit is in 625 line mode (PAL

 

 

 

system).

 

 

 

 

 

625/50 Disc

limit

An attempt was made to play back a disc

Use a disc recorded with the NTSC

 

 

recorded with the PAL system when this

system.

 

 

unit is in 525(U) or 525(J) line mode

 

 

 

(NTSC system).

 

 

 

 

 

No Support!

off

A disc recorded in an unsupported

Use a disc recorded in the MPEG IMX or

 

 

recording format was inserted.

DVCAM format.

 

 

 

 

Disc Error!

off

Normal playback is not possible because

Use another disc.

 

 

of a disc defect.

You can check the state of a disc by

 

 

 

checking playback condition marks (see

 

 

 

page 35).

a) With respect to setting of basic menu item 016

 

 

During control panel operations

Message in time

Display

Description

Action

data display

condition a)

 

 

REMOTE!

on

A button was pressed while the remote

To operate from the control panel, wait

 

 

control switch was set to “REMOTE.”

until control by the remote device ends

 

 

 

and then set the remote control switch to

 

 

 

“LOCAL.”

 

 

 

 

No Disc!

on

A button was pressed with no disc

Operate after inserting a disc.

 

 

loaded.

 

 

 

 

 

REC INHI.!

on

An attempt was made to record, display

Try the operation again after setting the

 

 

an E-E display, record an essence mark,

write-protect tab to the recording enabled

 

 

or add a quick scene selection sub clip.

position.

 

 

 

 

REC INHI.!

limit

An attempt was made to save the current

 

 

 

clip list on a write-protected disc.

 

 

 

 

 

REC INHI.!

off

An attempt was made to delete a clip

 

 

 

from a write-protected disc.

 

 

 

 

 

REC INHI.!

off

An attempt was made to format a write-

 

 

 

protected disc.

 

 

 

 

 

Troubleshooting and Maintenance 8 Chapter

8-3 Alarms 89