|
|
Error codes appear in the time data display when an error (usually a hardware problem) occurs. Error codes and error messages appear on the image display.
When an error message appears, follow the instructions in the error message to resolve the problem.
Error code
Error code
Error code in time data display
Error code
ERROR
AN ERROR HAS BEEN
DETECTED. INFORM SERVICE
OF FOLLOWING CODE:
PRESS EJECT KEY
TO EJECT DISC.
Error message on image display
An alarm (warning message) appears in the time data display when an operation is attempted which is inappropriate for the settings on this unit or the state of the disc. The image display shows the alarm message and also the action to take to resolve the problem.
Alarm in time data display
ALARM
REMOTE MODE IS SELECTED.
SET REMOTE/LOCAL/NETWORK
SWITCH TO LOCAL.
Alarm on image display
8-3-1 Alarm List
The following tables list the alarms displayed by this unit, categorized according to the state of the unit when the alarms occur.
The setting of basic menu item 016 “ALARM DISPLAY” determines whether or not some of these alarms appear. The “Display condition” column in the tables shows whether the alarm is displayed according to or regardless of the setting of menu item 016.
off: Always display, regardless of the setting.
limit: Display when the setting is “limit” or “on.”
on: Display only when the setting is “on.”
See
Troubleshooting and Maintenance 8 Chapter
87 | |
|
|