Spectrum Brands MI.61XX Dynamic Parameters, Order information

12 MI.61xx Manual

Hardware information Introduction

Dynamic Parameters

Dynamic parameters are measured at ± 1 V output level and 50 Ohm termination with a spectrum analyser. The samplerate selected is the maximum possible samplerate. Signal fre-

quency is equal to the cut-off frequency of the filter. SNR and RMS noise parameters may differ depending on the quality of the used PC. SNR = Signal to Noise Ratio, THD = Total Harmo-

nic Distortion

Order information

MI.6110 MI.6111

Test - Samplerate 125 MS/s 125 MS/s

Filter 3

Characteristics 5th order Butterworth

-3 dB bandwidth 25 MHz 25 MHz

SNR ±1 V in 50 ohm -49 dB

THD ±1 V in 50 ohm -42 dB

Filter 2

Characteristics 4th order Butterworth

-3 dB bandwidth 5 MHz 5 MHz

SNR ±1 V in 50 ohm -42 dB

THD ±1 V in 50 ohm -67 dB

Filter 1

Characteristics 4th order Butterworth

-3 dB bandwidth 500 kHz 500 kHz

SNR ±1 V in 50 ohm -72 dB

THD ±1 V in 50 ohm -54 dB

Order No Description Order No Description

MI6110 MI.6111 with 16 MSample memory and drivers/SBench 5.x MI61xx-32M Option: 32 MSample mem instead of 16 MSampl e standard mem

MI6111 MI.6111 with 16 MSample memory and drivers/SBench 5.x MI61xx-64M Option: 64 MSample mem instead of 16 MSampl e standard mem

MI61xx-128M Option: 128 MSample mem instead of 16 MSample standard mem

MI6xxx-mr Option Multiple Replay: Memory segmentation MI61xx-256M Option: 256 MSample mem instead of 16 MSample standard mem

MI6xxx-gs Option Gated Sampling: Gate signal controls replay MI61xx-512M Option: 512 MSample mem instead of 16 MSample standard mem

MI6xxx-cs Synchronisation of 2 - 4 boards, one option per system MI61xx-up Additional handling costs for later memory upgrade

MI6xxx-smod Star Hub: Synchronisation of 2 - 16 boards, one option per system MI61xx-dl DASYLab driver for MI.61xx series

MIxxxx.xio Extra I/O, internal connector: 16 DI/O, 4 Analog out MI61xx-hp VEE driver for MI.61xx series

MIxxxx-xmf Extra I/O, external connector: 24 DI/O, 4 Analog out, incl. cable MI61xx-lv LabVIEW driver for MI.61xx series

MATLAB MATLAB driver for all MI.xxxx, MC.xxxx and MX.xxxx series.

Cab-3f-9m-80 Adapter cable: SMB female to BNC male 80 cm Cab-3f-9f-80 Adapter cable: SMB female to BNC female 80 cm

Cab-3f-9m-200 Adapter cable: SMB female to BNC male 200 cm Cab-3f-9f-200 Adapter cable: SMB female to BNC female 200 cm

Contents

Main Page Page Page Page Introduction Preface General Information Page Additional options Extra I/O (Option -XMF) Extra I/O (Option -XIO) Starhub The Spectrum type plate Introduction Hardware information (c) Spectrum GmbH 11 Hardware information Block diagram Technical Data 12 MI.61xx Manual Hardware information Introduction Dynamic Parameters Order information Hardware Installation System Requirements Warnings ESD Precautions Cooling Precautions Installing a board with digital inputs/outputs Installing a board with extra I/O (Option -XMF) Installing multiple boards synchronized by starhub Installing multiple synchronized boards Software Driver Installation Interrupt Sharing Windows 98 Page Windows 2000 Page Windows XP Page Windows NT Adding boards to the Windows NT driver Linux Overview Page Software Software Overview First Test with SBench C/C++ Driver Interface Header files Microsoft Visual C++ Linux Gnu C Other Windows C/C++ compilers National Instruments LabWindows/CVI Page Page Delphi (Pascal) Programming Interface Type definition Include Driver Examples Page Visual Basic Programming Interface Include Driver Visual Basic Examples VBA for Excel Examples Page Programming the Board Register tables Programming examples Error handling Initialization Starting the automatic initialization routine PCI Register Hardware version Date of production Serial number Maximum possible sample rate Installed memory Installed features and options Used interrupt line Used type of driver Powerdown and reset Analog Outputs Channel Selection Important note on channels selection Disabling the outputs Setting up the outputs Output Amplifiers Output offset Maximum Output Range Output Filters Standard generation modes General description Singleshot mode Continuous Mode Posttrigger Mode Page Starting without interrupt (classic mode) Starting with interrupt driven mode Data organization Writing data with SpcSetData Sample format FIFO Mode General Information Background FIFO Write Speed Limitations Programming Software Buffers Buffer processing FIFO mode Example FIFO generation mode Data organization Sample format Clock generation Internally generated sample rate Standard internal sample rate Using plain quartz with no PLL External reference clock External clocking Direct external clock External clock with divider Trigger modes and appendant registers General Description Software trigger External TTL trigger Edge triggers Page Option Multiple Replay Output modes Standard Mode FIFO Mode Trigger modes Trigger modes Option Multiple Replay Resulting start delays Option Gated Replay Output modes Standard Mode FIFO Mode Trigger modes Example program Option Extra I/O Digital I/Os Channel direction Transfer Data Analog Outputs Programming example Synchronization (Option) The different synchronization options Synchronization with option cascading Synchronization with option starhub The setup order for the different synchronization options Setup Order for use with standard (non FIFO) mode and equally clocked boards Page Page Page Setup synchronization for use with FIFO mode and equally clocked boards Page Additions for synchronizing different boards SumSampleRateNSampleRate=NActChPerModuleN ----------------------------------------------------------------------------------= ClockDivider SyncSpeed SampleRateNActChPerModuleN Page Additions for equal boards with different sample rates Resulting delays using different boards or speeds = ResultingDelay ClockMasterDelay ClockSlaveDelayN Appendix Error Codes Appendix Error Codes Pin assignment of the multipin connector Extra I/O with external connector(Option -XMF) Pin assignment of the multipin cable Pin assignment of the internal multipin connector Extra I/O with internal connector (Option -XIO)