
2. GETTING STARTED
2.0MOUNTING THE GPS CHARTPLOTTER
The GPS chartplotter is supplied with hardware for bracket or flush mounting. Below are pictures showing actual examples of the two types of installation.
2.1BRACKET MOUNTING
The GPS chartplotter can be mounted using the supplied bracket. Before installing ensure the area the plotters bracket is mounted to is strong enough to support the weight of the chartplotter especially while under way.
After the location is found, attach the mounting base to the area using the supplied hardware.
Figure 2.1 - Installing/removing chartplotter (Bracket)
2.2FLUSH MOUNTING
The GPS chartplotter is supplied with a flush mount template for the cutout hole and screw holes required to install the chartplotter.
NOTE
Before drilling holes ensure there are no obstructions behind the location that could interfere with the mounting and there is physically enough room to mount the chartplotter.
1.After a location is found, peal the template label from the backing and apply the label to the mounting area.
GPS chartplotters |
| Page 15 |
|