Standard Horizon CP155C, CP1000C, CP175C owner manual Adjusting the Time, Adjusting Time

5.Press [CLEAR] or move the ShuttlePoint knob to the left to exit the menu and show the Chart Page.

NOTE

When the chartplotter is in COURSE UP mode a small arrow icon will be shown on the Chart page indicating the direction of North.

3.2ADJUSTING THE TIME

The time information supplied by the GPS satellites is in Universal Time Coordinates (UTC or Greenwich England Mean Time). To change the chartplotter to read the correct time, first you must figure out the offset and if it is daylight savings time. For example on the West coast of the United States or Pacific Standard Time the offset needed would be –08:00 or –07:00 for daylight savings time, Eastern Standard Time –05:00 or –04:00 for daylight savings time.

Figure 3.2 - Adjusting Time

NOTE

This map shows offset for standard time. For daylight saving time, subtract one hour from the offset time.

Figure 3.2a - General Setup/Time Settings menu

Page 30 GPS chartplotters