Standard Horizon CP1000C, CP155C, CP175C User C-CARD Menu, Formatting the User C-CARD

9.USER C-CARD

The Optional C-MAP User C-CARD is used to back up Marks, Routes, and Tracks stored in your chartplotters memory. The User C-CARD is similar to a back up disk used with a PC, in case you have to clear your chartplotters memory, or if you would like to transfer waypoint, Track and route information from one Standard Horizon chartplotter to another.

9.0USER C-CARD MENU

C-MAP offers a special card that may be used to backup the User Points and Tracks the you have created in the chartplotter. This optional card is similar to using a floppy disc on a PC to backup your files or to transfer the information that you have stored to a friends chartplotter. The information shown below will assist you to transfer the User Points, Routes and Track history to the optional User C-CARD.

1Time of file creation

2Date of file creation

3Type of data contained in the file (Mark file, Waypoint file...)

4Number of selected Slot

5File name

6Number of Selected file Information on stored User

7Points on Internal Memory

4

5

6

7

SLOT 1

FILE 1

MRKS 2

WPTS 5

RTES 1

TRKS 566

SAVE LOAD DELETE FORMAT CHANGE

1

2

3

Figure 3.12 - User C-CARD Menu

9.0.0 Formatting the User C-CARD

1.Press [MENU], move the ShuttlePoint knob to highlight USER POINTS and press [ENTER].

2.Move the ShuttlePoint knob to highlight USER C-CARDand press [ENTER].

3.Select FORMAT and press [ENTER].

4.A popup Warning window will to confirm you want to format the User C-CARD.

3.Select YES and press [ENTER] to confirm (select NO otherwise). The format of User C-CARD must be done before using a new User C-CARD: this operation prepares the User C-CARD to receive and store information.

NOTE

Formatting permanently erases all files previously saved on the User C-CARD.

GPS chartplotters Page 53