Standard Horizon CP155C, CP1000C, CP175C Creating a NEW Mark with the MARK/WAYPOINTS List

Figure 5.1.1a - Moving Mark or Waypoint (II)

5.2MARK/WAYPOINTS LIST

The MARK/WAYPOINTS LIST shows all the Marks and Waypoints that have been stored into the GPS chartplotter. This page also allows you to:

ICON	Allows sorting by icon type
FIND	Searches through the Marks or Waypoints to find a point by name using the ShuttlePoint knob
LOCATE	Shows the position of a Mark or Waypoint on the Chart Page
EDIT	Allows you to edit a previous stored Mark or Waypoint
NEW MARK	Allows entering in Marks, editing icon type and position
MODE	This selection controls how the Marks or Waypoints are shown on the Chart Page. Selections are:
	a. ICON-only icon (no name) is shown
	b. HIDE-All Marks or Waypoints are hidden
	c. SHOW ALL-All Marks or Waypoints are shown
	d. ICON ALL-All Icons are shown without name
SORT	Sort the name of the Mark or Waypoint in ascending or descending order
SEND	Sends the stored points to a external device (PC) capable of listening to NMEA WPL sentence.
RECEIVE	Receive the points from an external device that is capable of sending WPL sentence.
	NOTE

The SEND and RECEIVE functions are usually used by navigation programs running on a Personal Computer example Nobeltech.

Figure 5.2 - Mark/Waypoints List

5.3CREATING A NEW MARK WITH THE MARK/WAYPOINTS LIST

NOTE

This function is very useful if you have a list of Marks that you want to enter into the chartplotter.

GPS chartplotters Page 39