Customizing the Data Windows | Standard Horizon CP1000C, CP155C

	Seabed Type	: Enables or disable the seabed type; “M” Mud, “R” Rock, “K” Kelp, “St” Stone…
	Ports & Services	: Enables or disable the display of Ports and Services (areas along the shore with facilities for
		mooring, petrol, hospitals, Coast Guard, Maintenance, Electricity, Police…
	Tracks & Routes	: Enables or disables the display of Tracks and Routes (recommended and established routes
		for ships at Sea, including traffic separation schemes, deep water routes…).

Underwater Objects : Enable or disables the display of underwater objects (obstructions, wrecks, cables….).

10.0.4.1 Depth Settings Menu

The Depth Settings Menu controls the depth information shown on the Chart Page.

Depth Areas	: Enables or disables the display of depth areas
Depth Areas >	: Sets a min reference depth value.
Depth Areas <	: Sets a max reference depth value

Depth Lines and Soundings : Enables or disables the display of Depth Lines and Soundings.

Depth Lines & Soundings > : Sets a min reference depth & soundings value.

Depth Lines & Soundings < : Sets a max reference depth & soundings value.

The Land Settings menu controls the level of cartographic details shown on the land areas.

Rivers & Lakes : Enables or disables the display of rivers and lakes.

Natural Features : Enables or disbles the display of natural features (any topographic features formed by the action of natural process; coastlines…)

Cultural Features : Enables or disables cultural features (any man made topographic feature; built-up areas, roads)

Landmarks	: Enables or disables the display of landmarks (any prominent objects such as monument, building,
	silo, tower, mast… on land which can be used in determining a location or a direction).

The Chart settings menu controls the details shown on the C-MAP C-CARD.

Lat/Lon Grid : Enables or disables the display of Latitude and Longitude grid lines.

Chart Boundaries : Enables the display of Chart Boundaries, The Auto settings shows only the last 4 charts contained on the C-Card.

		Figure 10.0.4.3 - Chart Settings Menu
Cartography		: Allows the chartplotter to zoom in to lower levels where that the C-MAP Cartography does not
		cover. When this feature is disabled and the zoom key is pressed the chartplotter will zoom in and
		show cartography that is either on the C-CARD or on the background map. When a zoom level is
		reached that does not have cartography the chartplotter will continue to zoom in to lower scales,
		however no cartography will be shown.
Mixing Levels		: When the map coverage at the current chart scale does not fill the entire display, the chartplotter
		draws the rest of the map using charts from above and below the current scale. When this function
		is turned on you will notice the display may redraw 2 to 3 times to show all the details.
		NOTE
	This function only operates with C-MAP NT+ C-CARDs.


Declutter		: Due to the amount of cartography shown on the display, it may be necessary to enable the declutter
		filter. The Declutter filter assists in the appearance of the cartography on the display (helpful with
		Full cartography is enabled).

The data fields contained on the General, 1 Line small/large and 2 line small data windows

GPS chartplotters		Page 59