13. TECHNICAL TESTS
13.0SYSTEM TEST
If you have connected your chartplotter according to the instructions, and chosen the proper menu selection for your device, and are still having problems with your chartplotter, the extended
Figure 13.0 - System Test
Use the ShuttlePoint knob to select the desired test. Choose the test press [ENTER]. To exit from any submenu press [CLEAR]. To exit from the System Test turn Off the chartplotter.
13.0.0 RAM Menu (reset)
This test verifies the integrity of the memories and if desired during this test all the internal memory can be erased and the default setting restored.
RAM Test
To verify the integrity of the RAM. If on the screen the message ERROR appears, the RAM is physically damaged. Contact your Dealer or STANDARD HORIZON.
RAM Clear
To clear internal memory. If the chartplotter exhibits unusual operations, or appears to be malfunctioning, it may be possible to correct the problem by clearing RAM.
This operation will erase all Marks, Routes, stored Track plots and Destinations. It will also return all selections (Input Data Format, Autopilot selection, etc.) to original default values. To confirm clear RAM press [ENTER] again (but if at this time you do not wish to clear RAM press [CLEAR]).
13.0.1 DIM Menu
To select the desired value for brightness and keypad light.
Contrast
Each time you move the ShuttlePoint knob to right, the screen will decrease brightness, move it to the left to increase brightness.
GPS chartplotters |
| Page 73 |
|
