Standard Horizon CP1000C Changing the backlight and contrast, Selecting North Up or Course Up

Models: CP175C CP155C CP1000C

1 82
Download 82 pages 28.09 Kb
Page 27
Image 27

1.Press [MENU] and move the ShuttlePoint knob to select SETUP and press [ENTER].

2.Move the ShuttlePoint knob to select GENERAL SETUP and press [ENTER].

3.Now select SHIP ICON and press [ENTER] or move the ShuttlePoint knob to the right to show the popup window with ship icons.

4.Move the ShuttlePoint knob to select the desired icon and press [ENTER] or move the ShuttlePoint knob to the right to select a new icon.

5.Press [CLEAR] or move the ShuttlePoint knob to the left to exit the menu and show the Chart Page.

3.1.4Changing the backlight and contrast

With the chartplotter turned On, briefly press [PWR] to show the light and contrast popup window. Move the ShuttlePoint knob to the left or right to adjust the LCD backlight intensity or up or down to change the LCD contrast.

Press [ENTER] to set.

Figure 3.1.4 - Backlight and Contrast adjustment

3.1.5Selecting North Up or Course Up

The default selection is NORTH UP, however you may want the top of the Chart Page oriented so it will always show the area ahead of the direction your vessel is traveling which is called COURSE UP.

Figure 3.1.5 - General Setup menu

1.Press [MENU], move the ShuttlePoint knob to select SETUP and press [ENTER] or move the ShuttlePoint knob to the right.

2.Move the ShuttlePoint knob to GENERAL SETUP and press [ENTER] or move the ShuttlePoint knob to the right.

3.A popup window will be shown, move the ShuttlePoint knob to COURSE UP/NORTH UP and press [ENTER] or move the ShuttlePoint knob to the right.

4.Another popup window will be shown with NORTH UP and COURSE UP, move the ShuttlePoint knob to the desired selection and press [ENTER] or move the ShuttlePoint knob to the right.

GPS chartplotters

 

Page 29

 

Page 27
Image 27
Standard Horizon CP1000C, CP155C, CP175C owner manual Changing the backlight and contrast, Selecting North Up or Course Up