– 12 –
ENGLISH
6. Loading the Ribbon Cartridge and Paper

6-1. SP2300 type

6-1-1.Loading the Ribbon Cartridge
1Turn off power to the printer.
2Lift the cover up approx. 3 cm. Hold
the cover tilted at this angle, then
pull it toward you to remove it.
3Place the ribbon cartridge in the
direction shown in Fig. 6-2 and press
it down to load it. If loading of the
ribbon cartridge is not satisfactory,
press down the cartridge while ro-
tating the ribbon feed knob in the
direction of the arrow.
4Turn the ribbon feed knob of the
ribbon cartridge in the direction of
the arrow to remove slack in the
ribbon.
5Mount the cover by reversing the
procedure outlined in step 2 above.
Fig. 6-1 Removing the cover
Fig. 6-2 Loading the ribbon cartridge
Cover
Power off
Ribbon separater
Print head
Ink ribbon
Ribbon
feed knob
Notched part
Ribbon
cartridge