Star Micronics SP2000 user manual Through the paper exit

Roll paper

Fig. 6-5 Setting the paper

Paper exit

Paper feeder

Roll paper

Fig. 6-6 Loading the paper

4While observing the direction of the roll, set the paper roll into the hol- low as shown in Fig. 6-5.

ENGLISH

5Insert the edge of the paper into the paper feeder. If inserted correctly, the edge of the paper will pass

through the paper exit.

6Insert the top edge of the paper into the tear bar slot, then mount the cover by reversing the procedure for re- moving the cover in step 1 above. Note: When the paper end mark ap-

pears on the paper, replace the roll paper before it runs out.

Tear bar

Fig. 6-7

– 14 –