[When using single-ply paper]
Auto cutter paper slit
Paper feeder
Roll paper
5Inset the edge of the paper into the paper feeder. If inserted correctly, the edge of the paper will pass through the auto cutter paper slit.
The paper will be cut once.
6Remove the cut tip, and mount the cover by reversing the procedure outlined in step 1.
Note: when the paper end mark appears on the paper, replace the paper roll before it runs out.
ENGLISH
Fig. 6-14 Loading the paper
[When using multi-ply paper]
Upper | Paper | Auto cutter |
| ||
insertion |
| |
paper |
| |
slit |
| |
|
|
Upper paper
Print head | Platen |
|
| Lower paper |
Lower paper |
|
Print head | Platen |
Fig. 6-15 Insertion of the paper into the auto cutter (When using copying paper)
5 Lift up the auto cutter and place it in a vertical position.
6 Insert the edge of the paper into the paper feeder. If inserted correctly, the edge of the paper will pass through the paper exit.
– 18 –
