Star Micronics SP2000 Errors, Error Description Power lamp On-line lamp Buzzer Recovery

7-2. Errors

Determine the nature of the error by the flashing of the lamp or the sound of the buzzer.

Error Description	Power lamp	On-line lamp	Buzzer	Recovery
				Conditions
No paper	Flashes at 1-	Off	4 short beeps
	second intervals		(0.13 seconds)	*1
			repeated twice
Paper near end of	Flashes at 2-	Off	None
roll (when Near End	second intervals	On (after on-line		*2
Stop is operative)		switch pushed)
Mechanical error	Flashes at 0.25-	Off	One short (0.13
(other than cutter	second intervals		sec.) and one long	*3
error)			(0.5 sec.) beep
Cutter error (on	Flashes at 0.125-	Off	Two short (0.13
models with cutter	second intervals		sec.) and one long	*3
only)			(0.5 sec.) beep
Print-order overload	Flashes at 0.5-	On	None	*4
error	second intervals
RAM R/W error	Off	On	None	*5
CPU error	Off	Flashes at 0.25-	Sounds for 2	*5
		second intervals	seconds

*1 After changing the paper, press the On-line switch.

*2 Press the On-line switch to continue printing; or change the paper and press the On-line switch.

*3 After clearing the paper jam or remedying another problem, press the On-line switch.

*4 Printing will resume automatically after some time has elapsed. (Recovery is automatic after the print head has cooled.)

*5 This is not a recoverable error. Consult dealer for repairs.

ENGLISH

– 22 –