Star Micronics SP2000 user manual 163

■DIP switch 2

The following table shows all the possible settings for the DIP switch. The factory default settings are ON for switches 2-1 through 2-6 and OFF for switches 2-7 through 2-8.

Switch	Function	ON	OFF
2-1	Baud Rate	See table below
2-2
2-3	Data Length	8 bits	7 bits
2-4	Parity Check	Disabled	Enabled
2-5	Parity	Odd	Even
2-6	Handshake	DTR/DSR	XON/XOFF
2-7	Pin 6 (DSR) Reset Signal	Enabled	Disabled
2-8	Pin 25 (INIT) Reset Signal	Enabled	Disabled

Baud Rate	Switch 2-1	Switch 2-2
1200BPS	OFF	OFF
2400BPS	ON	OFF
4800BPS	OFF	ON
9600BPS	ON	ON

APPENDIX

– 163 –