SM4-630

SSPET5

2. Assembly instructions

»These installation instructions are intended for persons with skills in electrical and mechanical areas due to their training, ex-

perience and received instructions.

Personnel using these installation instructions must be instruc- ted in the regulations for the prevention of accidents, the opera- ting conditions and safety regulations and their implementation.

Ensure in each case that the personnel are informed.

The installation instructions provided in the corresponding ope- rating instructions apply for all connected equipment.

Please observe all safety regulations for the operation of lifting gear.

All installation work must be carried out with the equipment dis- connected from electrical power an compressed air supply.

L

For installation work taking place at heights of over approx. 6

 

feet (1829) in, use only ladders or similar equipment and

 

working platforms intended for this purpose. At greater

 

heights, the proper equipment for protection against falling

 

must be worn.

 

Use only suitable lifting gear which is in proper working order

 

and load suspension devices with sufficient carrying capac-

 

ity. Do not stand or work under suspended loads!

 

Use only suitable workshop equipment.

 

 

F

Install the equipment such that all parts are easily accessi-

ble; this facilitates maintenance and repair work.

Assembly instructions 13

Page 14
Image 14
Sterling SSPET 5 operating instructions Assembly instructions