SSPET5
Installation
Mount the brush holder.
Mount the cover (G).
Mount the turbine housing (F).
Mount the screws (E) at the turbine housing.
Mount the ground connections (C) and the mains cable (D). Mount the lid (B).
Mount the screws (A) at the lid.
Install the unit.
F
Observe that no cables will be squeezed.
Carbon brushes can be replaced twice.
After that the turbine has to be completely replaced.
&
Order numbers
Turbine (1200 W): | ID 83380 |
Carbon brushes (switching off): | ID 85628 |
Maintenance 43
